Author: dennis52e

New Transom Windows

[/caption]

Insulation applied on the inside

Then the new naugahyde is applied
Opening is masked off
Clean hull surface with 50:50 denatured alcohol and water and the port light frame with acetone. Make sure to dry both surfaces.

[caption id="attachment_1116" align="alignleft" width="300"] New port light is laid in place and held by tape so not to fall

Attach ring with screws from the inside. Make sure to set tension of screw driver, so as not to strip screws.
Finished port light

Job progresses
All Done!
Cozy inside

It’s “Captain Dennis” to you now!

As of August 17, 2018 I now have my Captains’s License. It has taken me four years to get to this point.

My Credentials are as follows:

Master Of Self-Propelled Vessels Including Auxiliary Sail Of Less Than 50 Gross Register Tons (GRT) Upon Inland Waters.

OUPV-Operator Of Uninspected Passenger Vessels As Defined In 46 U.S.C. 2101 (42)(B) Upon Near Coastal Waters Not More Than 100 Miles Offshore.

Assistance Towing

Ordinary Seaman

Wiper

Steward’s Department (F,H)

So if you need some boat work on the bay or maybe a boat delivery on the Pacific coast, I could be your guy.